Application:
The Next Generation Mini Spin and Mini Spin PLUS are Micro centrifuges designed
for fast centrifuging of small volumes of biological fluids. Ideal for
separating serum or plasma from blood cells in whole blood samples, performing
micro hematocrit (packed cell volume) estimations on anticoagulated blood
samples and preparing urine for sediment examinations. A variety of capped
plastic blood tubes can be accommodated from 1.5ml to 2ml volume. Both
centrifuges feature a new Rotor Clip System to make rotors simple and
quick to change.
Feature:
- Easy to Operate
-
Simply load and balance the tubes in the rotor, close the lid and switch on.
-
Set a timer and switch off manually.
-
The Meteor Mini-3s centrifuge with 4-Place Rotor fits 4 x 1.5ml ,
microcentrifuge (Eppendorf) tubes or 4 x 2ml (10mm x 45mm) screw top blood
collection tubes as well as most other smaller tubes.
-
If your practice does not run microhematocrit samples then this centrifuge is
ideal for you.
-
If your requirements should change, our 12-Place 40mm Microhematocrit Rotor is
available to purchase at any time separately.
-
Suggested Spinning Times (guidelines only)
-
Serum/Plasma - 2 minutes minimum
-
Urine - 30 seconds maximum
-
Microhematocrit - 3 minutes minimum
Specification:
|
Product model
|
Mini Spin Centrifuge 10K
|
|
Input Voltage
|
AC100-250V/50/60Hz
|
|
Max speed [r/min.]
|
10，000r/min.±3%
|
|
Max RCF [×g]
|
5，610×g
|
|
Rotor capacity [ml]
|
Angle rotor： 2/1.5/0.5/0.2ml×8 PCR Strip tube
rotor：0.2ml×8×4(PCR)
|
|
Operation mode
|
PI power direct drive
|
|
Power fuse tube
|
PPTC/ self restoring fuse / no need to change
|
|
Length × width × height [mm]
|
155×168×118mm
|
|
Weight
|
1.3Kg
|
English
